So far, we have provided several papers on or related to environmental engineering, which is provided by environmental consulting firms like ours, Environmental Safety Consultants, Inc. (ESC). We provided information on environmental permits, then went into an overview of environmental engineering. Next, we addressed industrial wastewater and, finally, air emissions control provided by an air engineer. There was also a paper discussing Florida NPDES (National Pollutant Discharge Elimination System) Industrial Stormwater requirements. Now we will discuss the Stormwater Pollution Prevention Plan (SWPPP).
Stormwater Pollution Prevention Plan (SWPPP)
The current paper will discuss environmental engineering required for an SWPPP (Stormwater Pollution Prevention Plan). The regulatory requirements are provided by both the U.S. EPA (Environmental Protection Agency, www.epa.gov) and the FDEP (Florida Department of Environmental Protection, www.floridadep.gov). The requirements discussed herein primarily cover manufacturing and industrial facilities with SIC (Standard Industrial Classification) Codes 21 – 39 with specific exposure to stormwater.
The objective of the Stormwater Pollution Prevention Plan is self-evident from its name. That is, the SWPPP is prepared by an environmental engineer to prevent pollution of stormwater so it does not discharge and impact receiving waters. Why? Because if it does, it can impair the biological organisms and public health.
Components of Stormwater Pollution Prevention Plan
In preparing the SWPPP, the environmental engineer first identifies the facility and describes its operations, location, and receiving surface waters. Then, information and data are gathered in the following areas to assess the facility’s impact to stormwater:
- Topography, runoff, & discharge point(s)
- Material inventory, quantities, & exposure
- Significant spills or leaks last three years
- Non-stormwater discharges
- Pollutant sources & specific parameters
- Best Management Practices (BMPs) to control pollutants
Based on the results of the preceding, the environmental engineer discusses the findings with the client, then prepares the SWPPP and submits it for review. It is important that the client be able to implement and use the plan to reduce or eliminate pollutants in the facility’s stormwater runoff.
The client’s management must endorse the SWPPP and sign it as documentation. A Pollution Prevention Team is formed and identified in the SWPPP. Team members and other personnel receive training. Resources are committed to attain the plan’s objective by implementing the BMPs selected. Visual monitoring of the stormwater discharge is required quarterly and laboratory analysis may be required during the second and fourth years of the five year permit. All records are kept in the SWPPP and, thus, it is a living document.
So there is a discussion of the preparation of an SWPPP by an environmental engineer! If you need any assistance, Environmental Safety Consultants (www.escflorida.com) is here. We are a Florida licensed environmental consulting and Florida licensed environmental engineering firm with a P.E. on staff. We have the credentials and experience to help you with your SWPPP. We are just a telephone call (800- 226-1735) or an e-mail away (firstname.lastname@example.org). Contact us today!